設為主頁 | 加入收藏 | 產品展示 | 聯系正睿 |

歡迎訪問濟南正睿廣告有限公司官網!

楊經理

13969120902

您先的位置:首頁 > 新聞資訊 > 公司新聞

公司新聞

濟南彩鋼板房屋面滲漏維修方法

文章發布: 發表時間:2017-07-18 10:18:55

隨著市場經濟的開展,中國鋼鐵產業在量、質的方面有了飛躍的開展,給其它職業奠定了堅實的根底,特別是建筑業。改變了以磚、瓦、灰、石為首要的建筑資料格式,呈現了濟南彩鋼板房。這一建筑結構的呈現使電廠汽輪機廠房、轎車制造業、飛機制造業、大型廠房、大型各種超市、物流倉庫等廣泛選用。濟南彩鋼板房最大長處是施工周期短、建筑物資料輕、根底請求條件低、可以大跨度、室內空間大、運用方便等。但也存在必定的疑問,首要疑問是:屋蓋、鉚釘處、板縫處有滲漏景象,影響到正常運用。

With the development of market economy, China's iron and steel industry in quantity, quality has been a leap forward, to other occupations have laid a solid foundation, especially in the construction industry. Changed to brick, tile, ash, stone as the primary form of building materials, showing the Ji'nan color steel board. The appearance of the building structure is widely used in power plant, automobile manufacturing, aircraft manufacturing, large workshop, large supermarkets, logistics warehouse and so on. Ji'nan color steel board room is the biggest advantage of the short construction period, building materials, light, low requirements of the underlying conditions, large span, large indoor space, easy to use, etc.. But there are also certain questions, the primary question is: roof, rivets, slab joints have leakage phenomenon, affect the normal use.
?
.
一、鉚釘處漏水修理辦法:
First, the repair of leakage at the rivet:
使用陽光2000PA單組份防水膠涂刷4次,厚度大約1.5㎜擺布,直徑Φ60㎜擺布,下一次涂刷以上一次涂層不粘手為準,并一次比一次涂的直徑大Φ15㎜,呈中心厚圓周薄。
The use of sun 2000PA one component waterproof glue brushing 4 times, the thickness of about 1.5 mm diameter and 60 mm at the mercy, mercy, under a brush a sticky coating above as the standard, and a large diameter diameter coated 15 mm thick thin circle is the center.
二、接縫處漏水修理辦法:
Two, joint leakage repair method:
1、小接縫修理辦法:
1, small joint repair method:
① 可在縫處兩頭涂刷寬60㎜陽光2000PA單組份防水膠,縫附近20㎜不涂。
In the joint of two 60 mm wide brush sunshine 2000PA one component waterproof glue, 20 mm is not coated with the joints.
②無紡布(或玻璃纖布),布寬150㎜,張貼在涂陽光2000PA防水膠上面。
The non-woven fabric (or glass fiber cloth), cloth width of 150 mm, posted on the 2000PA coated waterproof glue on the sun.
③在無紡布或玻璃纖布上涂刷3遍,涂刷時后一遍比前一遍寬50㎜,厚度1.8㎜擺布。后一次涂刷以上一次涂層不粘手為準。
The glass fiber cloth or non-woven fabric brushing 3 times, besmear again after than before over 50 mm wide, 1.8 mm thickness. After the first coating of the above coating non stick hand.
2、 板接縫較大修理辦法:
2, the larger repair method:
①可往縫中填嵌DM-600 密封者 PU 密封膠
Can be embedded into the DM-600 seal embedded PU sealant
②在縫處兩頭涂刷寬60㎜陽光2000PA單組份防水膠,縫附近20㎜不涂。
In the joint of two 60 mm wide brush sunshine 2000PA one component waterproof glue, 20 mm is not coated with the joints.
③無紡布或玻璃纖布,布寬150㎜,張貼在涂陽光2000PA防水膠上面。
The glass fiber cloth or non-woven cloth, a width of 150 mm, posted on the 2000PA coated waterproof glue on the sun.
④在張貼的布上涂刷3遍陽光2000PA單組份防水膠。涂刷時后一遍要比前一遍寬50㎜,厚度1.8㎜擺布,呈中心厚兩頭薄,后一次涂刷以上一次涂層不粘手為準。陽光2000PA單組份防水膠,縫附近20㎜不涂。
In the post cloth brushing 3 times the sun 2000PA one component waterproof glue. After brushing again than before over a width of 50 mm, 1.8 mm thickness is at the mercy of center two thick thin, after more than a brush a sticky coating shall prevail. The sun 2000PA one component waterproof glue, 20 mm is not coated with the joints.
③無紡布或玻璃纖布,布寬150㎜,張貼在涂陽光2000PA防水膠上面。
The glass fiber cloth or non-woven cloth, a width of 150 mm, posted on the 2000PA coated waterproof glue on the sun.
④在張貼的布上涂刷3遍陽光2000PA單組份防水膠。涂刷時后一遍要比前一遍寬50㎜,厚度1.8㎜擺布,呈中心厚兩頭薄,后一次涂刷以上一次涂層不粘手為準。
In the post cloth brushing 3 times the sun 2000PA one component waterproof glue. After brushing again than before over a width of 50 mm, 1.8 mm thickness is at the mercy of center two thick thin, after more than a brush a sticky coating shall prevail.

福利AV导航