設為主頁 | 加入收藏 | 產品展示 | 聯系正睿 |

歡迎訪問濟南正睿廣告有限公司官網!

楊經理

13969120902

您先的位置:首頁 > 新聞資訊 > 行業新聞

行業新聞

濟南彩鋼板房:模具彈簧彈力不足原因分析

文章發布: 發表時間:2017-07-18 11:03:26

以現在的模具繃簧的開展狀況來看,模具繃簧分為金屬螺旋模具繃簧,氮氣模具繃簧。

金屬模具繃簧:選用進口合金繃簧鋼制造,質量與美國DANLY模具繃簧和日本大同模具繃簧毫無區別,但報價低其約40%以上。廣泛應用于模具、夾具、工業離合器、剎車構件及各種機械構件等。
Metal mold spring: imported alloy spring steel manufacturing, quality and DANLY of the United States and Japan Datong mold mold spring spring is no difference, but the price low above about 40%. Widely used in mold, fixture, industrial clutch, brake components and all kinds of mechanical components.
氮氣模具繃簧:國內制造質量已達到國際水準,報價低約50%,氮氣模具繃簧可與Dadco、Kaller、Misumi、Hyson、博頂、Quiri等品牌氮氣模具繃簧交換,交期短服務方便。
Nitrogen spring mould: domestic manufacturing quality has reached the international level, low price of about 50%, the nitrogen spring spring and mold exchangeable Dadco, Kaller, Misumi, Hyson, Quiri, and other brands of nitrogen Bo top mold, short delivery service.
模具繃簧在外力效果下發作形機械掛鐘,發條玩具。當發條咱們知道,轎車車架與車的效果一方面是頂緊釘書釘,的效果一方面是頂緊釘書釘,靠上緊發條股動。靠上緊發條股動能康復狀況。
Die spring attack in the external force under the effect of mechanical clocks, toys. When we know a car, car frame and the effect of hand is the top tight staples, the effect of hand is tightly wound by staples, femoral artery. The rehabilitation of the kinetic energy by tightening the strands.
模具繃簧“彈力缺乏”的原因有:
Why die "is the lack of elastic spring":
1.繃簧質量等級弄錯:無意或成心把普通繃簧當優異繃簧或進口繃簧運用,然后致使感受彈力不行。
1 spring quality grade: no mistake or mean the ordinary spring when the spring or spring with excellent imported, and then causing no elastic feeling.
2.非標繃簧規劃制造參數不合理:只重視外徑、內徑、長度等參數,通常疏忽線材橫截面積和節距的大小,然后引致彈力不行。
2 non-standard spring manufacturing planning unreasonable parameter: only pay attention to the diameter, diameter, length and other parameters, usually neglect the wire cross-sectional area and pitch size, and then by no stretch.
3.規范繃簧選型不合理:因圖報價便宜,選擇了較輕載荷類型而無法接受較重載荷,然后致使感受彈力不行。
3 standard spring selection unreasonable: because the map quotation cheap, choose the light load type and cannot accept the heavier load, and then causing no elastic feeling.
4.繃簧線材自身偏軟,或繃簧淬火溫度偏低或保溫時間不行長,或繃簧成型后回火溫度過高且時間長,致使抗拉壓強度抵而彈力不行——這才是真實意義上的彈力不行。
The 4 spring wire itself is soft, or spring quenching temperature is relatively low or the holding time not long, or spring after forming the tempering temperature is too high and the time is long, the tensile strength and elastic not against this is not the true meaning of elastic.
5.超越規定溫度運用而致使彈性降低甚至失掉彈性。
5. exceed the prescribed temperature and cause elasticity to decrease or even lose elasticity.




濟南彩鋼板房 http://www.xtzisha.com/

福利AV导航